Barco LED-PRO, Руководство пользователя

Страница: 71 / 186

LED-PRO • User’s Guide 57
4. Operation
Using the Setup Wizard
3. Press SEL to launch the wizard and display the Setup Wizard Start Message .
Figure 4-32. Setup Wizard Start Message
4. Press SEL to continue. During this interval, LED-PRO will detect the tiles, query
the tiles and count the number of tiles. The larger the LED wall, the longer the
interval.
~
If no errors are detected, at the conclusion of this “detection” interval, the
Wall Information Menu is displayed as shown below.
~
If errors were detected, please continue with step 5 below.
Figure 4-33. Wizard - Wall Information Menu (sample)
Following are descriptions of each menu field:
~
Type — displays the type of LED tile detected.
~
Count — displays the number of LED tiles detected.
~
Fiber Tx ID — displays the address of the Fiberlink transmitter, if used.
~
Fiber Rx ID — displays the address of the Fiberlink receiver, if used.
If no errors were detected during the “detection” interval, continue with step 6 .
5. If errors were found during the “detection” interval, the Wall Information Menu
will not be shown. Instead, one of four possible messages will be shown:
~
If no tiles were detected, you will be asked to “ Check cabling and
power .” When complete, press SEL to continue.
~
If the Fiberlink Transmitter is detected but the Receiver is not, you will
be asked to “ Check cabling and power .” During this interval, a white
test pattern will appear. Press SEL to continue, and then verify that wall
is powered up.
~
If both the Fiberlink Transmitter and Receiver are detected, but no tiles
are detected, you will be asked to “ Check cabling and power .” During
this interval, a white test pattern will appear. Press SEL to continue, and
then verify that wall is powered up.
L E D - P R O F U L L W I Z A R D
C o n n e c t a l l p o w e r
a n d v i d e o c a b l e s
P r e s s < S E L > t o s t a r t
Note An error message will be shown if the LED wall is not
connected.
W A L L I N F O R M A T I O N
> T y p e :
I L i t e 3
C o u n t : 2 0
F i b e r T x I D 0 0 0 2
F i b e r R x I D 0 0 0 3
N e x t