![background image](http://html1.mh-extra.com/html/barco/led-pro/led-pro_user-manual_3883323070.webp)
56
LED-PRO • User’s Guide
4. Operation
Using the Setup Wizard
rëáåÖ=íÜÉ=pÉíìé=táò~êÇ
The
Setup Wizard
allows users to quickly set up and align a basic LED display — without
the need of the Director Toolset. The Wizard automatically guides the user through the
entire setup process, including:
•
Wall detection (type and size)
•
Addressing and positioning tiles
•
Aligning LED-PRO’s output resolution to match the wall
•
Wall contrast and gamma adjustment
Please note the following important points:
•
The Wizard can only be used with standard LED Tiles. MiPIX, MiSPHERE and
creative OLite displays require the Director Toolset.
•
The Director Toolset is still required for wall color calibration, tile firmware
updates, and for creating and applying custom gamma curves.
Use the following steps to run the
Setup Wizard
:
1.
Please note the following important Setup Wizard prerequisites:
~
Ensure that your LED wall is properly connected to LED-PRO, and that
power is enabled to all devices.
~
Ensure that you know how your LED wall is cabled (e.g., horizontally or
vertically), as shown below:
Figure 4-31.
LED Tile Cabling Examples
~
Ensure that you know where your “first” LED tile is located, as viewed
from the front of the wall (e.g., the bottom left). This is the tile to which
LED-PRO (or Fiberlink) is connected.
2.
From the
Setup Menu
, select
Setup Wizard
to display the
Setup Wizard Start
Menu
.
Horizontal Cabling
Vertical Cabling
Содержание LED-PRO
