![background image](http://html1.mh-extra.com/html/barco/led-pro/led-pro_user-manual_3883323068.webp)
54
LED-PRO • User’s Guide
4. Operation
Using the Setup Menu
5.
Scroll to the
Program EDID
line and press
SEL
. The following warning message
is shown:
Figure 4-26.
EDID Warning Message
~
Press
SEL
to proceed with the non-volatile memory programming.
~
Press
ESC
key to cancel the operation.
As an additional precaution, LED-PRO verifies that no cables are connected to
the DVI-I input and loop through connectors. If a DVI source or display device is
detected, the following message appears:
Figure 4-27.
EDID DVI Input Detection Error Message
~
Disconnect all cables from the DVI input connectors, then press
ESC
to
continue with programming.
Once the system detects that no DVI source or display is connected, LED-PRO
proceeds with programming. The following message is shown:
Figure 4-28.
EDID Programming Message
~
If programming is successful, please continue with step
6
.
~
If programming fails, the following message is shown:
Figure 4-29.
EDID Programming Failed Message
W A R N I N G ! M A K E S U R E
D V I I N & L O O P T H R U
A R E N O T C O N N E C T E D
S E L = C o n t , E S C = A b o r t
E R R O R ! D V I I N P U T A N D
L O O P T H R U C O N N S M U S T
B E D I S C O N N E C T E D !
< E S C > = C o n t i n u e
P r o g r a m m i n g E D I D
P l e a s e w a i t . . .
E D I D P r o g F a i l e d !
D i s c o n n e c t D V I i n
& l o o p t h r u c o n n s
< E S C > = C o n t i n u e
Содержание LED-PRO
