Barco LED-PRO, Руководство пользователя

Страница: 40 / 186

26 LED-PRO • User’s Guide
4. Operation
Control Overview
`çåíêçä=lîÉêîáÉï
There are several ways to control the LED-PRO:
•
The front panel is available for status and control using the display, the ADJUST
knob and the two menu “navigation” buttons ( SEL and ESC ). In conjunction with
other dedicated buttons, these controls enable you to configure the system, to
adjust all system parameters, and to utilize the “wizards.”
•
The unit can be controlled remotely via RS-232 or Ethernet interface. In
Appendix B, refer to the “
LED-PRO Remote Commands ” section on page 128
for remote control command details.
•
The Director Toolset is a software application that is used to detect the LED-
PRO and provide it with information concerning the LED tiles. Operations of the
Director Toolset are not covered in this guide. Please refer to the “
Director
Toolset User’s Guide ” for more information.
mçïÉêJré=fåáíá~äáò~íáçå
After connecting power to the LED-PRO, locate the power switch on the back of the
chassis, and turn the power ON. The
LED button lights, and the display shows a series of
initialization screens. The screens vary depending upon the last state of the system:
•
Standard Bootup
•
Bootup in Ethernet Mode
•
Bootup with a Stored LOGO
pí~åÇ~êÇ=_ççíìé
While the main board is initializing, the following screens are shown on the display
•
Initialization Screen 1 displays the “Program Loading” message.
Figure 4-1. Initialization Screen 1
•
Initialization Screen 2 displays the “Transferring” message.
Figure 4-2. Initialization Screen 2
P r o g r a m L o a d i n g
P l e a s e W a i t
T r a n s f e r r i n g t o
m a i n p r o g r a m