Barco LED-PRO, Руководство пользователя

Страница: 47 / 186

LED-PRO • User’s Guide 33
4. Operation
Quick Function Reference
nìáÅâ=cìåÅíáçå=oÉÑÉêÉåÅÉ
Use the following table to quickly access the proper menu for a specific function. Both
hyperlinks and page numbers are provided.
Table 4-1. LED-PRO Quick Function Reference Table
How to: Use the Following: Page
Adjust 1:1 timing 1:1 Timing Adjust Menu 70
Adjust diagonal motion Diagonal Motion 94
Adjust display brightness VFD Brightness 88
Adjust input position (abbreviated procedure) Using the Input Position Menu 105
Adjust LED wall contrast LED Contrast 82
Adjust LED wall gamma curve LED Gamma 82
Adjust output refresh rate Refresh Rate 81
Adjust output timing parameters Timing Adjust 81
Adjust oversample timing OverSample Timing Adjust Menu 71
Align or adjust a DVI source Source Alignment — DVI 48
Align or adjust an analog source Source Alignment — Analog 43
Align or adjust an SDI source Source Alignment — SDI 46
Capture a LOGO Capture Logo 86
Change LED wall status from Standby to Enabled LED Status 82
Change the input format Input Format 69
Change the sampling mode Sampling 69
Change the transition time (rate) Trans Time 85
Change the transition type Trans With 85
Delete a “global” preset (or “View”) Delete 50
Delete a custom input format Custom In Format 72
Delete a LOGO Delete Logo 86
Delete an input configuration Delete Config 79
Display software version Software Version 92
Enable or disable a test pattern Type 94
Enable or disable an LED test pattern LED Test Pattern 102
Enable or disable auto-acquire In Auto Acquire 87
Enable or disable freeze mode Freeze 87
Enable or disable letterbox Letterbox 76