![background image](http://html1.mh-extra.com/html/barco/led-pro/led-pro_user-manual_3883323061.webp)
LED-PRO • User’s Guide
47
4. Operation
Using the Setup Menu
p~íìê~íáçå
From the
SDI Source Alignment Menu
, select
Saturation
to adjust the saturation of the
selected input.
•
The adjustment range is -75 to +125.
•
100 is the default setting.
pÜ~êéåÉëë
From the
SDI Source Alignment Menu
, select
Sharpness
to adjust the sharpness of the
selected input. This selection sets the scaler's sharpening (or softening) value.
•
The sharpening range extends from -10 (softest) to +10 (sharpest).
•
0 is the default setting (which sets the scaler to its optimum sharpness).
`äáé=íç=pìÄ_äâ
From the
SDI Source Alignment Menu
, select
Clip to SubBlk
to eliminate low level noise
in black regions of the image.
•
The adjustment range is 0 to -15.
•
0 is the default setting.
iìã~=qê~ÅâáåÖ
From the
SDI Source Alignment Menu
, select
Luma Tracking
to prevent green haze
from appearing in regions of low light.
•
The adjustment range is 0 to -15.
•
0 is the default setting.
bafa=asf
From the
SDI Source Alignment Menu
, select
EDID DVI
to display the
EDID DVI In
Format Menu
, which enables you to update LED-PRO's preferred EDID resolution. Refer
to the “
Programming EDID
” section on page 53 for instructions.
Содержание LED-PRO
