5. The On Screen Display (OSD)
5-14 __________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
5.3.3
PIP control
On the
PIP CONTROL
dialog, the vertical and horizontal position of the image can be set as well as an area for
the embedded picture be defined.
PIP means picture-in-picture and displays dual moving images from two separate sources (e.g., PC and video) at
the same time.
There are two different ways: one source is displayed in full size, and the other one is displayed in a small size
overlaying the full screen picture. The full screen picture is called master source, and the other one PIP source.
Besides this display mode, the two sources can be displayed "side to side", which is called PAP mode (picture
and picture).
The source selected on input 1 is always the master source, the source selected on input 2 is always the PIP
source.
The master source and the PIP source can be switched by means of the function key
F3
on the
RCU
(which in fact
is changing sources at the inputs).
PIP settings made with input 2 are only applied when input 2 becomes the PIP master!
