5. The On Screen Display (OSD)
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
________________________________________________________________________________________
5-9
5.3.1.3
Hue
Hue
can be adjusted in the range between -45 and +45.
The color = hue is most noticeable in areas of white.
There are multiple color models, one of them is the HSV model describing color as hue (color), saturation (the
amount of white light in the color), and V (value, the amount of black/lightness/brightness).
With PAL, part of the color information on the video signal is reversed in phase with each line,
which automatically corrects phase errors in the transmission of the signal.
With NTSC, the
Hue
control allows to perform the correction manually and to adjust the color
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
Hue
•
Press
5
and
6
to navigate to
Hue
•
Use the
left
and
right
cursor keys to in-
crease/decrease the value in steps of 1
The current value is indicated.
•
Use
3
and
4
to increase/decrease the value in
steps of 1
The current value is indicated.
The value is applied without any further action.
5.3.1.4
Saturation
Saturation
can be adjusted in the range between 0 and 100.
Saturation adjusts the amount of white light in the color.
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
Saturation
•
Press
5
and
6
to navigate to
Saturation
•
Use the
left
and
right
cursor keys to in-
crease/decrease the value in steps of 1
The current value is indicated.
•
Use
3
and
4
to increase/decrease the value in
steps of 1
The current value is indicated.
The value is applied without any further action.
5.3.1.5
Flesh tone
Flesh tone
can be switched
off
, or turned on
weak
,
soft
, or
strong
.
When in bright areas of the pictures the skin-tones show chalky white, the normal skin tone color can be re-
stored.
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
Flesh tone
•
Press
5
and
6
to navigate to
Flesh tone
•
Use the
left
and
right
cursor keys to select one
of the options
Off
,
Weak
,
Soft
,
Strong
The current selection is visualized by a white
caption.
•
Use
3
and
4
to select one of the options
Off
,
Weak
,
Soft
,
Strong
The selection value is visualized by a white cap-
tion.
The selection is applied without any further action.
