5. The On Screen Display (OSD)
5-16 __________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
5.3.3.1
PIP Mode
PIP Mode can be set to off, single, PAP.
When PIP mode is
Off
, only one source is displayed.
When PIP mode is
Single
, the source connected to input 1 is the master source and displayed according its set-
tings, whereas the source connected to input 2 is the PIP source and displayed either in
Small
,
Med
ium or
Large
size according the
PIP Size
selections.
The position of the PIP source is set using the
Vertical
and
Horizontal
adjustment.
PIP Size, Vertical and Horizontal are only enabled if PIP Mode is selected Single.
In case no source is connected to input 2,
Single will result in an empty window with blue borders,
PAP will result in displaying source1 at the left half of the monitor (right half remains
black).
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
PIP Mode
•
Press
5
and
6
to navigate to
PIP Mode
•
Use the
left
and
right
cursor keys to select one
of the options
Off
,
Single
,
PAP
The current selection is visualized by a white
caption.
•
Use
3
and
4
to select one of the options
Off
,
Single, PAP
The current selection is visualized by a white cap-
tion.
The selection is applied without any further action.
Using the direct access key F2, the selected PIP mode can be toggled between On and Off.
Using the direct access key F3, the PIP master and the PIP source can be toggled.
5.3.3.2
PIP Size
PIP size can be set to small, medium, and large.
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
PIP Size
•
Press
5
and
6
to navigate to
PIP Size
•
Use the
left
and
right
cursor keys to select one
of the options
Small, Med
ium,
Large
.
The current selection is visualized by a white
caption.
•
Use
3
and
4
to select one of the options
Small,
Med
ium,
Large
. The current selection is visualized
by a white caption.
The selection is applied without any further action.