5. The On Screen Display (OSD)
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
______________________________________________________________________________________
5-17
5.3.3.3
Vertical
Vertical can be adjusted in the range from 0 to 255.
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
Vertical
•
Press
5
and
6
to navigate to
Vertical
•
Use the
left
and
right
cursor keys to in-
crease/decrease the value in steps of 1
The current value is indicated.
(increase: move down/decrease: move up)
•
Use
3
and
4
to increase/decrease the value in
steps of 1
The current value is indicated.
(increase: move down/decrease: move up)
The value is applied without any further action.
5.3.3.4
Horizontal
Horizontal can be adjusted in the range from 0 to 255.
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
Horizontal
•
Press
5
and
6
to navigate to
Horizontal
•
Use the
left
and
right
cursor keys to in-
crease/decrease the value in steps of 1
The current value is indicated.
(increase: move right/decrease: move left)
•
Use
3
and
4
to increase/decrease the value in
steps of 1
The current value is indicated.
(increase: move right/decrease: move left)
The value is applied without any further action.
5.3.4
Combination of signals for main image and PiP/PaP
The following table lists the combination of signals for input 1 (main input) and input 2 (PiP/PaP). Not all combi-
nations are possible; some cause disturbances or result in images which are not properly scaled.
Input 1
Input 2
Comment
DVI
only possible for low resolutions,
higher resolutions cause an error message
(Pixel rate > 110MHz),
not recommended with Barco Transform H
system.
HD-SDI 1 or HD-SDI 2
OK
VGA
S-Video or Composite or Com-
ponent
OK
VGA
only possible for low resolutions,
higher resolutions cause an error message
(Pixel rate > 110MHz),
not recommended with Barco Transform H
system.
HD-SDI 1 or HD-SDI 2
OK
DVI
S-Video or Composite or Com-
ponent
OK
