5. The On Screen Display (OSD)
5-6 ___________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
5.3
The signal menu (first and second input)
The signal menu allows to control and adjust the settings of the source
The commands can be applied for the first input and for the second input, respectively.
Please note: the Image setting and Position setting is only available for the first (active)
input!
In case more than one source is connected, the signal for input1 and input2 has to be
assigned, cf.
.
The signal for input1 can also be selected via the
function key F1,
5.8.1 Input selection with the function key F1
RCU
Icon
Push button (1: top most)
•
Press the
ADJ
key
input1
input2
•
Press
7
•
Use the
left
and
right
cursor keys to navi-
gate to the
signal
menu
•
Press
3
and
4
to navigate to the
signal
menu
•
Press
Enter
to select
•
Press
2
to select
•
Use the
left
ad
right
cursor keys to navi-
gate to
Display
•
Press
3
and
4
to navigate to
Display
•
Press
Enter
to select
•
Press
2
to select
The following sections will use the signal menu of the first input. For the second input, the
same dialogs are displayed, however some items are deactivated (Image, Position)
Nevertheless the dialogs may look different: some commands depend on the type of the
source. But this is independent from being input1 or input2!
The source menu button will turn blue. Subsequently the source
sub menu
opens with the items
Display
,
Position
,
PIP Contro
l,
Image
, and
Color
Image is only enabled for the source which is assigned to the first input!
The commands of Position are only enabled for the first input!
