Banner SureCross DX80 Скачать руководство пользователя страница 75

Страница: 75 / 96

P/N 134421

Banner Engineering Corp. • Minneapolis, MN U.S.A.

www.bannerengineering.com • Tel: 763.544.3164

SureCross™ DX80 Web Configurator

Instruction Manual

Examples

I/O Linking

Use the

I/O Linking

page to establish input to output linking between devices. Our simple example

uses a Gateway and only one Node. Notice that only the inputs are shown for any given device.

Only inputs are mapped to another device’s outputs.

If you make changes to a page and

leave the page without submitting

those changes to the Ethernet Bridge,

the changes are lost.

Tip

To save the changes to the XML file,

go to the

System > Setup > Config

File

page and click the Save button.

Changes made by clicking an Update

or Change button are temporary until

the changes are saved permanently in

the configuration file.

The Device # field shows which device is displayed. Use the Prev and Next buttons to scroll

through the devices.
In the sample screens shown, device 0, I/O point 1 (Gateway Discrete IN 1) is mapped to device 1,

I/O point 9 (Node Discrete OUT 1). Each of device 0’s input points 1, 2, 5, and 6 are mapped to the

corresponding outputs on device 1. Similarly, device 1’s inputs 1, 2, 5, and 6 are mapped to device

0’s outputs 9, 10, 13, and 14.
Banner Engineering does not recommend linking multiple inputs to a single output on any

SureCross device. The result will not be “Logic OR” of the multiple inputs; rather, the output

will respond to any input state changes as they occur. This will result in unpredictable and/or

undesirable network behavior.
After making changes to any screen, click the Change button to submit these changes to the

Ethernet Bridge then click the Send button to submit the I/O linking changes to the DX80 radio

devices.
To permanently save changes to the XML file, go to the

System > Setup > Config File

page and

click the Save or Save As buttons to save the configuration changes.

Содержание SureCross DX80

































































































Результаты поиска

Содержание SureCross DX80

Отзывы:

Бренды по названию

Популярные бренды

Banner SureCross DX80, Справочное руководство

Результаты поиска

Содержание SureCross DX80

Отзывы:

Бренды по названию

Популярные бренды