Banner SureCross DX80 Скачать руководство пользователя страница 52

Страница: 52 / 96

P/N 134421

Banner Engineering Corp. • Minneapolis, MN U.S.A.

www.bannerengineering.com • Tel: 763.544.3164

SureCross™ DX80 Web Configurator

Instruction Manual

System Tab

associated with the update service. Click the Apply DNS button to register this information. Save

the configuration file to retain this data.
DDNS status should normally show

No update needed

. It may show

Local IP not checked

yet

for a short time after booting up. If it shows

Tentative

and a reply of

nochg

, an update was

forced with no changes to actually register. Repeated

nochg

occurrences is regarded as abuse by

the dynamic DNS service(s), and a third occurrence is treated as a local error condition.
Any occurrence of a serious error puts the DDNS update in the

Suspended

state. If this occurs,

resolve the problem and restart the system or click

Reset DNS

. DO NOT click

Reset DNS

without

knowing the problem is resolved. Repeated attempts to update DNS inappropriately may result

in your host name being blocked. Clicking

Reset DNS

results in an immediate IP verification and

attempt to re-update DNS. The DNS server considers repeated updates resulting in no change

(

nochg

reply) to be abuse. Repeated IP verification (more frequently than once every 10 minutes) is

also considered abuse.
Connection errors are internal network related errors and include:

Error Code

Meaning

2001

General socket error

2005

Could not reach local DNS to look up remote host

2006

HTTP client aborted a web session

< 200

Unexpected network errors. Contact Banner Engineering if these errors occur.

Error messages that may be returned by the dynamic DNS service(s), noted as

last reply

, include:

Error Code

Meaning

badauth

The user name and/or password does not match the host name

nohost

The host name specified does not exist

notfqdn

The host name is not a fully qualified domain name (not in the form of name.
domain.com)

!yours

The host name does exist, but not under the user name given

abuse

The host name given is blocked for abuse.

Error messages returned by the dynamic DNS service(s) that require the attention of Banner

Engineering include:

Error Code

Meaning

badsys

The sycodestem is not valid

badagent

The user agent is not specified or is blocked for non-conformance to
specifications

!donator

Invalid option specified

numhost

Too many or too few hosts found

Error messages indicating a DDNS server error will be either

dnserr

911.

In both cases, wait a

minimum of one hour before restarting the system and/or contact the DDNS service to see when the

problem will be resolved.

Содержание SureCross DX80

































































































Результаты поиска

Содержание SureCross DX80

Отзывы:

Бренды по названию

Популярные бренды

Banner SureCross DX80, Справочное руководство

Результаты поиска

Содержание SureCross DX80

Отзывы:

Бренды по названию

Популярные бренды