Banner SureCross DX80 Скачать руководство пользователя

Страница: 68 / 96

P/N 134421

Banner Engineering Corp. • Minneapolis, MN U.S.A.

www.bannerengineering.com • Tel: 763.544.3164

SureCross™ DX80 Web Configurator

Instruction Manual

Advanced Tab

E-mail Server

Before the DX80 devices can send e-mail, the e-mail server and account information must be

entered in the

E-mail Server

page.

The information entered on this page represents the e-mail’s origin, not destination. The User

Name refers to the account login name assigned to this Ethernet Bridge or Gateway Pro device.

The System Contact must be the e-mail name assigned to the account (for example,

myemail@

mycompany.com

When using a DNS server on the Network tab, use Domain Names as shown in the example below.

Otherwise, enter the IP addresses of the SMTP and POP3 servers. Click the Update button on that

section of the screen. Fill in the System Name, System Location, and System Contact information.

The System Contact MUST be the e-mail account name. Click the Update button on the lower

section of the screen to submit the changes.
SMTP IP Address: The SMTP IP address is used if the SMTP server (outgoing e-mail) is at a static

IP address. If the SMTP server is known only by domain name and its IP address may change, use

the domain name and verify the

Network

tab uses a DNS server. Set the IP address to zero if a

domain name is used. If the IP Address is not zero, the IP address is used and the name ignored. A

typical SMTP server domain name looks something like

smtp.mycompany.com

. The default SMTP

port number is 25.
POP: The POP3 IP address is used if the POP3 server (incoming e-mail) is at a static IP address.

If the POP3 server is known by domain name, use the name instead and set the IP address to zero.
The system name and location are included in the default e-mail message to identify the e-mail’s

origin.

Содержание SureCross DX80

































































































Результаты поиска

Содержание SureCross DX80

Отзывы:

Похожие инструкции для SureCross DX80

Бренды по названию

Популярные бренды

Banner SureCross DX80, Справочное руководство

Результаты поиска

Содержание SureCross DX80

Отзывы:

Похожие инструкции для SureCross DX80

Бренды по названию

Популярные бренды