P/N 134421
2
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SureCross™ DX80 Web Configurator
Instruction Manual
Network Tab
Network Tab
Each tab accesses different aspects of the web-based configurator. Use the
Network
main tab to
configure the communications outside the radio network.
Modbus Data Submenu
The Ethernet processor in a Gateway Pro or Ethernet Bridge can serve as a Modbus master
device. The tables configured under the
Network
page define the Master communication settings
for Modbus RTU and Modbus/TCP clients and servers. Use the
Modbus Data
submenu to view
Modbus register data defined under the
Modbus RTU
set-up page.
RTU Registers
The
RTU Registers
screen displays the Modbus register contents for RTU slave devices defined
under the
Modbus RTU
set-up page.
To change the register data:
Enter a new register data value
Select the Update checkbox.
Click the Update button to send the new data to the device.
Hex checkbox: Select the Hex checkbox to view the data in hexidecimal form (not recommended for
floating point values).
Showing box: Lists the pages of registers for the selected slave (RTU unit).
Unit+ and Unit-: Scrolls through the list of RTU slave devices.
Update checkbox: Unless the Update checkbox is selected, this register data will not be submitted
to the Ethernet Bridge or Gateway Pro.
Other Commands
Prev and Next buttons: Scrolls through the pages of registers for the selected slave (RTU unit).
Update button: Sends new data or settings to the Ethernet Bridge or Gateway Pro.
1.
2.
3.
