Banner SureCross DX80 Скачать руководство пользователя страница 13

Страница: 13 / 96

P/N 134421

Banner Engineering Corp. • Minneapolis, MN U.S.A.

www.bannerengineering.com • Tel: 763.544.3164

SureCross™ DX80 Web Configurator

Instruction Manual

RF Devices Tab

Configure Points

After setting up the basic model for each device, configure the I/O points. There are two ways

to access the I/O points configuration screen: 1) use the

Configure Points

tab; or 2) click on the

hyperlinked device number in the left column of the

Select Models

table to access the

Expanded

Configure Points

page (see the

Expanded Configure Points

section).

Refer to the device’s data sheet for factory default information.

If you leave any Web Configurator

screen without clicking the Change

button to submit the changes to the

Ethernet Bridge or Gateway Pro, all

changes are lost.

Tip

Setting Up I/O Points

To set up an I/O point:

Select the I/O Enabled checkbox. Any active I/O point must be enabled or the I/O is

ignored.
Select an I/O type from the I/O Selection drop-down list. The

Configure Points

sample

screen shows a Gateway defined with four discrete IN, four discrete OUT, two analog IN,

and two analog OUT points. Always refer to the device data sheet to determine which

discrete and which analog I/O points are active for a given device. Note, however, that

the NPN and PNP settings for discrete I/O shown on the data sheet are only default

configuration settings and can be changed.
Define any applicable parameters, e.g. sample interval, report interval, hysteresis,

threshold, or any other parameter displaying on the main or expanded view screens.
After setting up all I/O points using either the

Configure Points

tab or the expanded

Configure Points

screen, click the Change button to submit the changes to the Ethernet

Bridge or Gateway Pro.
To send all I/O data to the devices, use the

Select Models

screen by selecting the Send

ALL checkbox and clicking the Update button. To send the individual I/O point changes,

use the expanded

Configure Points

screen and the Send button.

Содержание SureCross DX80

































































































Результаты поиска

Содержание SureCross DX80

Отзывы:

Бренды по названию

Популярные бренды

Banner SureCross DX80, Справочное руководство

Результаты поиска

Содержание SureCross DX80

Отзывы:

Бренды по названию

Популярные бренды