Banner iVu Plus BCR Gen2 Series Скачать руководство пользователя страница 179

Страница: 179 / 203

Numeric ID

Text ID

Description

10350

ARGUMENTS_DETECTED

Get command received with unneeded arguments

10351

INVALID_ARGUMENT_TYPE

Item ID specified must be an item (not a group or method)

10500

DATA_SET_EMPTY

Data export operation returned no results.

10900

SENSOR_NOT_READY

Command specified requires iVu BCR to be in the READY state.

10920

SENSOR_TYPE_NOT_ACTIVE

Command specified belongs to a different sensor type.

10950

DEVICE_TYPE_INVALID

Command not supported on this device type.

15000

VALUE_INVALID

Text value is invalid / unknown

15050

VALUE_INVALID

Text value is invalid - expecting True or False

15100

STRING_TOO_LONG

String value specified exceeds maximum allowable length

20002

COMPARE_DATA_DISABLED

Operation requires Barcode compare to be enabled

20003

COMPARE_MASK_INVALID

Compare mask invalid. Expecting string of 1's and 0's with length
equal to compare data string

20004

NUMBER_TO_FIND_NOT_ONE

Barcode number to find must be set to one for this operation.

20005

COMPARE_MASK_DISABLED

Operation requires Barcode compare mask to be enabled.

80000

REMOTE_DISPLAY_NOT_CONNECTED

Remote Display must be connected to obtain this value

80001

REMOTE_DISPLAY_NOT_SUPPORTED

This device does not have Remote Display capability

80100

COMMAND_MODE_EXPECTED

The Trigger Mode must be set to "Command" perform this
operation

80101

COMMAND_TIMED_OUT

The command timed out before finishing

80102

TRIGGER_REQUIRED

Access to the specified data requires a triggered inspection

80150

COMMAND_TIMED_OUT

The command timed out before finishing

80200

SYSTEM_ERROR_NOT_ACTIVE

The System Error must be active to execute this command

80350

MULTIPLE_INSPECTIONS_DISABLED

Requires multiple inspections to be enabled

80351

MULTIPLE_INSPECTIONS_EMPTY

No inspections are available in multiple inspection mode.

80400

PRODUCT_CHANGE_WHEN_NOT_READY

Sensor must be in the READY state to perform a product change.

80401

PRODUCT_CHANGE_INVALID_INSPECTION

Attempt to product change to an unknown or invalid inspection.

80402

PRODUCT_CHANGE_TIMEOUT

The Product Change operation timed out.

80403

PRODUCT_CHANGE_TO_SAME_INSPECTION

Attempt to product change to the same inspection.

80404

SENSOR_NAME_NOT_FOUND

Attempt to use a command without a sensor name in a multi-
sensor inspection

Examples of Operation

The following examples show how to utilize the iVu BCR Command Channel via the Industrial Ethernet connection.

Clear System Error

1. Write the number

as a 16-bit integer into the Command ID register.

2. Toggle the Command bit from 0 to 1 (bit 15 in the Input Bits/Input Coil Bits register).

3. Wait for the Command ACK flag to go from 0 to 1 (bit 15 in the Input Bits ACK/Input Coil Bits ACK register).

4. Verify that the Execution Error flag is not set (that is, the value should be 0). This is bit 15 in the Output Bits/Status

Coil Bits register. If the value is 1, read the Error Code register for more information.

5. Task Complete. Toggle the Command bit back to 0 (bit 15 in the Input Bits/Input Coil Bits register).

Get/Set Trigger Mode

Get the current Trigger Mode from the iVu BCR.

iVu Plus BCR Gen2 Series Sensor

www.bannerengineering.com - Tel: + 1 888 373 6767

179

Содержание iVu Plus BCR Gen2 Series











































































































































































































Результаты поиска

Содержание iVu Plus BCR Gen2 Series

Отзывы:

Бренды по названию

Популярные бренды

Banner iVu Plus BCR Gen2 Series, Инструкция по эксплуатации

Результаты поиска

Содержание iVu Plus BCR Gen2 Series

Отзывы:

Бренды по названию

Популярные бренды