B&R MAPPC800-ENG, Руководство пользователя

Страница: 190 / 396

190
Software • BIOS options
Panel PC 800 User's Manual V 1.00
1.4.9 IDE Configuration
Figure 94: 945GME Advanced IDE Configuration
BIOS setting Meaning Setting options Effect
ATA/IDE
Configuration Option for configuring the integrated
PATA and SATA controller. Compatible Both controllers run in Legacy or Compatible
Mode.
Disabled Both controllers disabled.
Enhanced Both controllers run in Enhanced or Native Mode.
Legacy IDE
Channels
1)
Option for configuring the Legacy IDE
channels in Compatible Mode. SATA Pri, PATA Sec SATA drives are address primarily and PATA
drive secondarily.
SATA only Only use SATA drives.
PATA only Only use PATA drives.
Configure SATA as
2)
The Serial ATA connections supported by
the Southbridge can be defined here. IDE The serial ATA hard drive is used as a parallel
ATA physical memory drive.
RAID RAID 0, 1, 5, 10 or the Intel® Matrix storage
technology can be configured here with the serial
ATA hard drive.
AHCI The AHCI setting enables the internal memory
driver for the SATA functions, which increase the
storage performance for random read-write
access by allowing the drive to determine the
sequence of commands.
Table 101: 945GME Advanced IDE Configuration setting options
Advanced
IDE Configuration
Legacy IDE Channels [SATA Pri, PATA Sec]
Primary IDE Master : [Hard Disk]
Primary IDE Slave : [Not Detected]
Secondary IDE Master : [Not Detected]
Secondary IDE Slave : [Not Detected]
Hard Disk Write Protect [Disabled]
IDE Detect Time Out (Sec) [35] Select Screen
ATA(PI) 80Pin Cable Detection [Host & Device] Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
ATA/IDE Configuration [Compatible]
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.