B&R MAPPC800-ENG, Руководство пользователя

Страница: 147 / 396

Commissioning • Connection examples
Section 3
Com
m
is
sio
ning
147 Panel PC 800 User's Manual V 1.00
4.6 Four Automation Panel 900 units via SDL
One Automation Panel 900 is connected to the integrated SDL interface via an SDL cable. Up
to three other Automation Panels of the same type are connected to this Automation Panel and
operated via SDL. All four panels show the same content (Display Clone).
USB is supported up to a maximum distance (SDL segment 1 + SDL segment 2) of 30 m on the
first two panels (front and back side). From a distance of 30 m and longer, USB is only available
for the first panel (front and back side). USB devices can only be connected directly to the
Automation Panel (without a hub).
4.6.1 Basic system requirements
The following table displays the possible combinations for the PPC800 system unit with CPU
board to implement the configuration shown in the figure above. If the maximum resolution is
limited when making the combination then it is also shown in the following table (e.g. for
connecting a non-B&R Automation Panel 900 device).
Figure 68: Configuration - Four Automation Panel 900 units via SDL
CPU board with system unit Limitation
Resolution
5PC820.1505-00 5PC820.1906-00
5PC800.B945-00
5PC800.B945-10
✓ ✓
Max. UXGA
5PC800.B945-01
5PC800.B945-11
✓ ✓
Max. UXGA
5PC800.B945-02
5PC800.B945-12
✓ ✓
Max. UXGA
5PC800.B945-03
5PC800.B945-13
✓ ✓
Max. UXGA
Table 82: Possible combinations of system unit and CPU board
✓
Panel PC 800
Monitor / Panel
connection
SDL segment 1
max. 40 m
Link: 5DLSDL.1000-01
USB not
possible
Link: 5DLSDL.1000-01
✓
USB OK
0
2
SDVO-B
x
Internal device number on the PPC
Link: 5DLSDL.1000-01
1
Link: 5DLSDL.1000-00
3
SDL segment 2
max. 40 m
SDL segment 3
max.
40 m
SDL Segment 4
max. 40 m
USB not
possible
USB
possible
Not dependent on segment length Dependent on segment length
✓
✓