B&R MAPPC800-ENG, Руководство пользователя

Страница: 238 / 396

238
Software • Upgrade information
Panel PC 800 User's Manual V 1.00
2.2 Firmware upgrade
The "PPC800 MTCX Upgrade" software makes it possible to update the firmware for multiple
controllers (MTCX, SDLR, SDLT), depending on the structure of the PPC800 system.
Current "PPC800 MTCX Upgrade" software can be downloaded directly from the service portal
on the B&R homepage (
www.br-automation.com ).
2.2.1 Procedure
To carry out a firmware upgrade, the following steps should be taken:
• Download the zip file from the B&R homepage.
• Create bootable media.
• Copy the contents of the *.zip file to the bootable media. If the B&R upgrade was already
added when the bootable media was created using the B&R OS Installer, then this step
is not necessary.
• Connect the bootable media to the PPC800 and reboot the device.
• The boot menu is shown after startup
• The system must be powered off and on again after a successful upgrade.
Information:
In MS-DOS, Win95 and Win98, a blank HD disk can be made bootable using the
command line command "sys a:" or "format a: /s".
Information concerning creating a bootable diskette in Windows XP cab be found on
page 241.
Information concerning creating a USB flash drive for a B&R upgrade can be found
on page 243.
Information concerning creating a CompactFlash card for a B&R upgrade can be
found on page 245.
Information:
The following boot menu options including descriptions are based on Version 1.02
of the PPC800 upgrade (MTCX, SDLR, SDLT) disk. In some cases, these descriptions
might not match the version you are currently using.