B&R MAPPC800-ENG, Руководство пользователя

Страница: 52 / 396

52
Technical data • Entire device
Panel PC 800 User's Manual V 1.00
2.6.4 Ethernet 1 (ETH1)
This Ethernet controller is integrated in the main board and is fed outwards via the system unit.
Driver support
A special driver is necessary for operating the Realtek Ethernet controllers RTL8111B/C. The
necessary software can be downloaded from the download area on the B&R homepage
(
www.br-automation.com ).
Ethernet 1 connection (ETH1
1)
)
1) The interfaces, etc. available on the device or module were numbered accordingly for easy identification. This numbering can differ from
the numbering used by the particular operating system.
Controller Realtek RTL8111B/C
2)
2) The Realtek RTL8111C is integrated in the CPU boards 5PC800.B945-05, 5PC800.B945-10, 5PC800.B945-11, 5PC800.B945-12,
5PC800.B945-13, 5PC800.B945-14.
RJ45 twisted pair (10BaseT/100BaseT), female
Cabling S/STP (Cat5e)
Transfer rate 10/100/1000 MBit/s
3)
3) Change-over takes place automatically.
Cable length max. 100 m (min. Cat5e)
Speed LED On Off
Green 100 Mbit/s 10 Mbit/s
4)
4) The 10 MBit/s transfer speed / connection is only present if the Link LED is simultaneously active.
Orange 1000 Mbit/s -
Link LED On Off
Orange Link
(Ethernet network
connection
available)
Activity (blinking)
(Data transfer in
progress)
Table 27: Ethernet connection (ETH1)
Information:
Required drivers can only be downloaded from the B&R homepage, not from
manufacturers' pages.
Ethernet 1
(ETH1)
(10/100/1000)