B&R MAPPC800-ENG, Руководство пользователя

Страница: 199 / 396

Software • BIOS options
Section 4
Soft
w
are
199 Panel PC 800 User's Manual V 1.00
BIOS setting Meaning Setting options Effect
USB Function USB ports can be enabled/disabled here.
The USB numbers (e.g. USB1, USB3,
etc.) are printed on the PPC800 housing).
Disabled Disables the USB port.
2 USB Ports USB1, USB3 are enabled.
4 USB Ports USB1, USB2, USB3, USB4 are enabled.
6 USB Ports USB1, USB2, USB3, USB4, USB5 are enabled.
8 USB Ports USB1, USB2, USB3, USB4, USB5, USB are
enabled on an AP via SDL.
USB 2.0 Controller Option for enabling or disabling USB 2.0
mode. Enabled All USB interfaces run in USB 2.0 mode.
Disabled All USB interfaces run in USB 1.1 mode.
Legacy USB Support Legacy USB support can be
enabled/disabled here.
USB interfaces do not function during
startup. USB is supported again after the
operating system has started. A USB
keyboard is still recognized during the
POST. Disabled Disables this function.
Enabled
Enables this function.
Auto Automatic enabling.
USB Legacy POST-
Always Option to enable Legacy USB Support
during the POST (Power On Self Test) the
same as the Legacy USB Support setting. Enabled The BIOS Setup can be called up during the
POST using a USB keyboard.
Disabled Disables this function.
USB Keyboard
Legacy Support USB keyboard support can be
enabled/disabled here. Disabled Disables this function.
Enabled
Enables this function.
USB Mouse Legacy
Support USB mouse support can be
enabled/disabled here. Disabled
Disables this function.
Enabled
Enables this function.
USB Storage Device
Support USB storage device support can be
enabled/disabled here. Disabled Disables this function.
Enabled Enables this function.
Port 64/60 Emulation Port 64/60 emulation can be
enabled/disabled here. Disabled USB keyboard functions in all systems excluding
Windows NT.
Enabled USB keyboard functions in Windows NT.
USB 2.0 Controller
Mode Settings can be made for the USB
controller. Full Speed 12 MBps
Hi Speed 480 MBps
BIOS EHCI Hand-
Off The support for the operating system can
be set up without the fully automatic EHCI
function. Disabled Disables the function
Enabled Enables this function.
USB Beep Message Option for outputting a tone each time a
USB device is detected by the BIOS
during the POST. Disabled Disables this function.
Enabled Enables this function.
USB Stick Default
Emulation You can set how the USB device is to be
used. Auto USB devices with fewer than 530MB of memory
are simulated as floppy disk drives and devices
with larger capacities are simulated as hard
drives.
Hard Disk An HDD-formatted drive can be used as an FDD
(e.g. zip drive) for starting the system.
Table 106: 945GME - Advanced USB Configuration - Setting options