Bandit
31
Copyright 8/19
MODEL SG-75
1.
Change track motor oil after first 500 hours then every 6 months or 1000 hours.
6 MONTH CHECK LIST
Every month these checks must be made:
OK REPAIRED
1. Drain and clean the fuel tank.
2.
Change hydraulic oil and flush the hydraulic tank.
3. Replace hydraulic suction screen(s) annually or every 2000 hours.
OK REPAIRED
YEARLY CHECK LIST
Every year these checks must be made:
MAINTENANCE
MAINTENANCE
PAINT CARE
To help keep up the appearance of your Bandit equipment and reduce the possibility of surface rust follow
these steps:
1. The machine should be washed on a regular basis with a non-abrasive mild detergent and then rinsed
thoroughly.
Do not pressure wash sensitive areas
like: decals, gauges, electronic devices, engine
control panel, near chips in the paint, etc.
2. If a stone chip, paint scratch, or paint crack occurs - it should be repaired immediately. Simply sand the
edgesofthedamagedpaintarea,maskoffthesurroundingarea,andapplyprimerandpainttothedry,
clean, and warm area. This will keep the damaged area from spreading or getting worse.
3. If you are unable to sand and mask the area, there are containers of primer and paint available. A small
brush can be used to touch up the area.
4.
Also,primerandmostcolorsofpaintareavailableinaerosolspraycanstosimplysprayovertheeffected
area after it is cleaned, dry, and warmed. This method is not as reliable as the process in step #2.
Itisalsoreportedthatsomeequipmentownerspolishtheirmachineatleastyearly,andkeepgoodmudflaps
on their towing trucks to prolong the machines paint.
WINDOW WASHING INSTRUCTIONS
DO NOT use any glass cleaner on windows. Follow these steps to clean the windows:
DO NOT USE RAZOR BLADES, SCRAPERS, SQUEEGEES, ETC.
1. Rinse with water to remove abrasive dirt.
2. Wash with soap or mild detergent, using a soft cloth sponge.
Compatible cleaners: Top Job, Joy®, Palmolive Liquid®, Windex® Ammonia Free
DO NOT SCRUB
3. Rinse once more, then dry with a soft cloth or chamois.
4. To remove grease, wet paint or decals: rub gently with a cloth wetted thoroughly in VM&P Natha or
Isopropyl Alcohol. Wash and rinse.
Содержание SG-75
