Bandit SG-75, Инструкция по эксплуатации и каталог запасных частей

Страница: 15 / 60

Bandit
13 Copyright 8/19
MODEL SG-75
EXAMPLES:
Decals located on your Bandit equipment contain useful information to assist you in operating your equipment
safely. Some of the decals on your machine and their location are shown in this section.
It is very important that all decals remain in place and in good condition on your machine. Please follow
the care and instructions given below:
1. You should use soap and water to keep your decals clean. Never use mineral spirits or any other
abrasive cleaners.
2. Immediately replace any missing or damaged decals. The location the decal is going to be
applied to must be clean and dry, and at least 40°F (5°C) before applying decal.
3. When the need arises to replace a machine component with a decal attached, be sure and replace
the decal.
4. Replacement decals are available, and can be purchased from the manufacturer or your Bandit Dealer.
­ 5.­ Peel­back­about­half­of­the­backer­paper­on­the­decal.­Position­it­on­the­fl­at,­dry,­clean­surface­so­­
­ ­ it­is­smooth­and­secure.­Peel­off­­the­remainder­of­the­backer­paper­as­you­continue­to­stick­the­­­
decal on the surface.
6. Rub decal from the center outward to remove air bubbles and to secure contact.
7. Combination English / Spanish decals are typically standard. Other foreign language decals are
available and may be purchased. Send translated decals required to Bandit Industries, Inc.
DECALS
DECALS
DECALS