Open and Close Doors
95
2
Pull the wiper arm out of the wiper motor shaft
with a puller (pay attention to the installation
position when disassembling, so that it can be
used normally when recovering).
9. Remove the round head screw that fixes the
lower left and right sides of the front window, 6
units on each side, total 12 units. Remove the
triangle plate of the front window (take the right
side of the vehicle as an example).
Caution
The length of these screw is not exactly the
same. The screw in the figure-A-position is
slightly shorter than that in the
figure-B-position. It should not be confused
in installation. In addition, the screw has a
torque requirement of 20 + 2NM during
installation.
