144
Start and drive
3
4L: four-wheel drive, low-gear, four-wheel
drive, can be used for a short time on off-road
roads requiring low speed and high traction. It is
not allowed to be used on dry or paved roads.
Switch gear
Switch between 2H and 4H
During the driving process of the vehicle (the
required speed is less than 30km/h), the driver
can switch between 2H and 4H at will without
stopping the vehicle, but should be in a straight
and uniform speed.
Switch between 4H and 4L:
1. Stop and keep the engine running;
2. Press the clutch pedal or move the
transmission lever to position N;
3. Turn transfer transfer switch to 4L or 4H
gears.Note: for MT models, don't lift the clutch
until transfer is completed;In the process of gear
changing, the target gear blinking, after the
completion of gear changing, the target gear is
always bright.
The upper left position of cluster displays the
current shift position
Caution
In order to avoid parts failure caused by
incorrect operation, this model does not
support the vehicle to install wheel side
clutch!
Warning
●
if the transfer gear is not fully engaged, it
may cause damage to the transfer or the
vehicle loses power and control, resulting in
personal injury accident
●
do not use four-wheel drive mode in dry
hard road for a long time.
●
if abnormal vibration of chassis is found
when turning, please check whether the
transfer gear is not placed in "2H".
●
use 4L only when additional traction is
required, and do not use 4L for long periods
of time.
●
the driving speed of vehicles in four-wheel
drive mode shall not be higher than 60KM/H
