220
Tires
4
Wheel Balance
Before the vehicle left the factory, the wheels
already underwent dynamic balance treatment.
However, many factors in the vehicle use
process will affect wheel balance, thus
resulting in wheel imbalance.
Be sure to promptly perform dynamic
Balance treatment on imbalanced wheels.
4 Otherwise, it will cause excessive wear to the
steering system, the suspension system and
tires.
After tires are replaced, the wheels must be
dynamically balanced again.
Dynamic balance standard for wheels:
cumulative
≤
10g.
Inaccurate Wheel Alignment
Inaccurate wheel alignment will result in
uneven wear to the tires, thus lowering driving
safety. If excessive uneven tire wear is found,
be sure to go to an authorized BAIC dealership
to have the wheels aligned.
Replacement of the Rim
Bent, cracked or seriously rusting or corroded
rims should be replaced. If the wheel nuts often
become loose, the wheels and wheel nuts should
be replaced. Wheels that leak should be
replaced (except for some repairable aluminum
wheels). If the above situations occur, be sure to
go an authorized BAIC dealership to have
repairs made.
The authorized BAIC dealership knows which
type of rim should be used. The new rim should
have the same load capacity, diameter, width
and alignment as those of the original wheels.
The new rim should also be installed identically
as the original wheels.
Rims can only be replaced using BAIC’s new
original parts. This will ensure that the new rims
match with your vehicle.
Warning
Use of an unsuitable rim will be dangerous.
It will affect the braking and steering
performance of the vehicle, resulting in tire
leakage and making the vehicle run out of
control. It may cause accidents, injuring you
or others.
Use of the wrong rim will also cause
problems to the life of the bearing, the
cooling of the brake, the calibration of the
speedometer or odometer, the focusing of the
headlights, the height of the bumper, the
ground clearance of the vehicle, and the
clearance between the tires or tire snow chain
and the vehicle body and chassis, etc.
Use of a used rim on the vehicle can be very
dangerous. There is no way for you to know
how the used rim has been used or how many
miles it has been driven. Such rims may
suddenly break down and cause an accident.
If you need to replace rims, be sure to use
BAIC’s new and original rims.
