112
Vehicle Lights and Vision
2
ON: Regardless of the state of the vehicle doors,
the reading light can belt.
Backlight Brightness Adjustment
As shown in the figure, the backlight brightness
adjustment roller is located in the dashboard
switch array on the driver’s side. When the
vehicle light control knob is in the small light
position or the low beam light position, the
backlights of the various buttons, the main
instrument and the radio will be lit. Turning the
adjustment roller upwards increases the amount
of backlighting, while turning it downwards
reduces it.
Tips
If the ignition key is in the LOCK position or
in pulled-out mode, the power leakage
protection function will be turned on: The
fog lights, the headlights and the reading
light will be turned off after approximately 8
minutes. If one or several of the fog lights, the
headlights and the reading light are switched
on again, the timing will start again. In the
event of remote locking within 8 minutes, the
corresponding light(s) will be turned off.
Windshield Wiper Tips
The front windshield wiper
The control part of the front windshield wipers
is a function contained in the rear right
multi-functional operating lever on the steering
wheel.
Point Wiping
In the “OFF” position, push the right
multi-functional operating lever in the direction
of -Arrow A- as shown in the figure, and the
wipers will carry out point wiping. In other
words, every time the operating lever is
operated, the wipers will wipe once only. After
the upward push action is completed, the
operating lever will automatically reset.
