16
HOW TO USE
HOW TO USE
17
E.
Engage car seat belt buckle and tongue. Push
down on the restraint while pulling on the lap
portion to remove all slack from the belt. Then,
pull the remaining slack in the sash belt and allow
excess belt to feed back into the retractor.
Remove
slack
Vehicle
seat belt
Engage
seat belt
NOTE:
Some vehicle seats have more rearward slope
than others. Use a rolled up towel or padding under the
seat for contoured vehicle seats to prevent excessive
recline.
Rolled up
towel or
padding
G.
Fit the Attachment Clip to the Anchor Fitting
making sure to remove as many twists as possible.
H.
Pull Upper Anchorage Adjustment Strap (C) to
remove any slack but do not tighten so much that the
restraint lifts off the car seat. Roll up excess strap
tightly and use storage band to neatly store excess
strap behind seat.
Always attach hook and remove slack.
F.
To lengthen the Upper Anchorage Strap, fully press
Adjuster Button (A) while pulling Upper Anchorage
Strap (B) to slacken as shown below.
Pull Adjustment Strap
to remove slack
Storage
Band
Always ensure that the car seat belt and upper anchorage strap are firmly restraining the restraint on the
vehicle seat.
Make sure Cup Holders (If fitted) do not interfere with closure of the car door.
IMPORTANT :
A
B
C
Attachment Clip
Car's Anchor Fitting
E
G
H
F
TODDLER USE
TODDLER USE
Storage
Band
Roll up tightly
so the webbing
is thick enough
to be held in the
storage band.
