32
33
HOW TO INSTALL WITH A CHILD HARNESS
HOW TO INSTALL WITH A CHILD HARNESS
Always attach the hook and remove the slack.
USING WITH Babylove EzyGo Harness™Series BL220/2010 or
Safe-n-Sound™Protecta PLUS™220/2010 Harness (purchased separately)
This Booster Seat is only suitable for use with Babylove EzyGo Harness™ Series BL220/2010 or Safe-n-
Sound™Protecta PLUS™Harness Series 220/2010. Refer to the instruction book supplied with the Child
Harness for full details of using and installing the Child Harness. When installing the Child Harness into
the vehicle and Booster Seat, connect the upper anchorage strap to the
VERSA
TETHER™ Catch on the
Booster Seat’s upper tether strap (as shown below).
If required, use the extension strap supplied with the child harness for all other instances to attach the
harness to anchor points in the luggage area such as the vehicle floor or ceiling. Not suitable for most
other styles of child safety harnesses.
INSTALLING INTO VEHICLE WITHOUT EXTENSION STRAP
Hook the Child Harness attachment clip (1) onto
VERSA
TETHER™ Catch (2). Then hook attachment
clip (3) onto anchor fitting (4). Ensure that none of the straps are twisted and not passing over any sharp
edges.
NOTE:
Do not use the
VERSA
TETHER™catch on the Child Harness Clip (1).
VERSA
TETHER
™
catch (2) is only for use with a Child Harness.
INSTALLING Babylove EzyGo Harness™Child Harness Series BL220 HARNESS
WITH EXTENSION STRAP INTO VEHICLE
An adjustable extension strap is supplied with the Child Harness. Hook the Babylove EzyGo
Harness™Child Harness clip first onto the extension strap catch (6), then hook the extension strap hook
onto the
VERSA
TETHER™ Catch on the Booster Seat’s upper anchorage strap (2) as shown below.
Attach the Booster Seat's attachment clip (3) to the car's anchor fitting (4) if not all ready attached.
Ensure that none of the straps are twisted or catching on sharp edges. Tighten the Booster Seat’s upper
anchorage strap (refer to page 17) then remove excess slack from the extension strap by pulling the
adjuster strap as illustrated below.
1.
Attachment Clip from Child Harness.
2.
VERSA
TETHER™ Catch.
3.
Booster Seat Attachment Clip.
4.
Anchor Fitting in the car.
Child Harness Attachment
Clip attaches to the
VERSA
TETHER™Catch
1.
Attachment clip from the Child Harness
2. VERSA
TETHER™ Catch
3.
Booster Seat Attachment Clip
4.
Anchor Fitting in the Car
5.
Adjustable Extension Strap
6.
Extension Strap Catch
7.
Extension Strap Attachment Clip
To lengthen the Adjustable
Extension strap rotate the adjuster
and pull the main strap.
Pull to remove
slack
Attachment Clip
attaches to the
VERSA
TETHER™
Catch
2
3
3
4
1
1
Pull to remove
slack
Pull to
lengthen
Rotate the
Adjuster to
lengthen
2
3
3
4
7
7
6
5
1
BOOSTER SEAT WITH CHILD HARNESS
BOOSTER SEAT WITH CHILD HARNESS
