METHOD 1: USING LAP-SASH SEAT
BELT WITH CHILD SAFETY HARNESS.
Refer to the Harness instructions for fitting the
gated slide to the lap-sash seat belt. Once fitted,
position the gated slide near to the child (under
the armrest) but not touching the child. Thread the
converted lap-sash seat belt through the harness
strap loops as shown left. Ensure there are no
twists in the harness, cross strap and seat belt.
IMPORTANT:
The Gated Slide must be removed from the seat
belt if the Booster Seat and Child Harness are no
longer used in the car to allow other users to use
the seatbelt as a lap-sash seatbelt.
Important Note:
Some vehicle seat belts are too
short and you may experience some difficulty
fitting the converted lap-sash around your child.
If so, adjust the gated slide nearer to your child,
(ensure the slide does not touch your child). This
may provide more belt length to fit your child, but
if the belt still will not fit, try another location in
the vehicle, e.g.. side seat. If the vehicle seatbelts
are still too short, then contact the vehicle
manufacturer for advice on longer seat belts.
37
36
HOW TO INSTALL WITH A CHILD HARNESS
HOW TO INSTALL WITH A CHILD HARNESS
Gated Slide
Harness strap loops
C.
Pull the left hand Harness Strap & Cross
Strap through the opposite shoulder slot. Hook
the Child Harness Attachment Clip onto the
VERSA
TETHER™Catch and ensure that the
straps line up to an equal length.
Faces towards
child.
Outer
strap.
Inner
strap.
C
Hook the Attachment Clip onto
VERSA
TETHER™ Catch.
Pull left hand Harness
Strap through
opposite slot until the
straps are of equal
length.
Position the
Gated Slide
near the child
(under the
armrest) but
not touching
the child.
BOOSTER SEAT WITH CHILD HARNESS
BOOSTER SEAT WITH CHILD HARNESS