F.
Roll up adjuster strap (with metal connector plate) and drop into
pocket in recline foot.
G. Store pads (if fitted) in a safe place for future use, or under the
cover. To store the buckle see page 23.
H.
Align cover and re-engage elastic loops at the front of the cover.
FIT THE SASH GUIDE
A.
Unhook the elastic loops at the top rear of the restraint, then pull the cover forward to reveal the Sash
Guide which is attached to a strap at the back of the seat cover.
24
25
HOW TO USE
HOW TO USE
STORING THE HARNESS
A.
Disengage harness buckle. Fully lengthen the harness
by pressing the Harness Adjustment lever and pulling the
harness shoulder straps.
B.
At the rear of the restraint, remove both of the harness
shoulder straps from metal Strap Connector by slipping strap
through open slot.
C.
Pull the shoulder straps through slots in the seat back.
D.
Remove the Elastic loops holding the cover in place at the
lower front of the seat. Lift the cover to expose the storage
inserts in the seat base.
E.
Feed the straps with harness buckle tongues through
the bottom rear of the seat cover (see location shown by
the arrow in drawing (C)). Roll up the harness straps with
harness buckle tongue and place them into the left and right
rear recess in the seat base (underneath the cover).
A
C
F
Strap
Connector
B
Sash Guide
Thread the Sash Guide through the chosen
slot in the seat cover. (See next page).
A
BOOSTER SEAT WITH SEATBELT
BOOSTER SEAT WITH SEATBELT
E
