48
49
ACCESSORIES & FEATURES
ACCESSORIES & FEATURES
Long Messy Mat™
Short Messy Mat™
Pockets
(where fitted)
Pockets
(where fitted)
MESSY MAT™ SEAT PROTECTOR (IF SUPPLIED)
Place ribbed or pocket end of the Messy Mat™ seat
protector on edge of car seat, smooth back toward
seat join (’A’) and fit in any excess Messy Mat™ into
the join of the car seat (’A’).
Hook and loop attachment referred in some
instruction books, are no longer required to fit this
model of Messy Mat™ seat protector.
CAUTION:
The pocket is only for small, light items. DO NOT
overload the pocket with heavy, bulky items as this
may damage the pocket or cause passengers to trip
over them.
HEAD PILLOW (WHERE FITTED)
The headrest is designed to provide extra comfort
and is suitable for use with the in-built harness
and when used in the Booster Seat Mode with a
Child Harness.
Fit straps through the desired pair of Upper
Shoulder Strap Slots to suit the size of the child
and over the top of the restraint as shown right.
Slide Head Pillow up or down to rest above the
shoulder strap slots being used.
CAUTION:
Do not use any other Head Pillow as they may
cause the seat to offer less protection.
CUP HOLDERS (IF SUPPLIED)
The Booster Seat has the facility to fit a cup holder on
either side of the seat. Fit the cup holder onto the seat to
use. Ensure the cup holder and its contents can not be
crushed by the car door. Cup Holder can be removed if not
in required.
IMPORTANT:
Only use for holding cups, bottles and drink cartons. Do
not use for hot drinks
Head
Pillow
Shoulder Pads
Cup holder
A
A
Head Pillow straps should be over the top of the
restraint and through either pair of top slots
Head
Pillow
straps
Upper Slots
suitable for
Head Pillow
straps
SHOULDER PADS (IF FITTED)
Shoulder Pads are designed to provide extra comfort for baby or
child and are easily fitted to the shoulder harness straps by:
A.
Pull apart fasteners and remove shoulder pads from harness.
B. Re-fit shoulder pads to harness and attach fasteners for use.
