14
HOW TO USE
STEPS IN CHANGING SHOULDER STRAP SLOTS
A.
Remove the restraint from vehicle.
B.
At the rear of the restraint, remove one of the harness
shoulder straps from metal Strap Connector by slipping strap
through open slot. The metal Strap Connector is shown in
diagram right.
C.
From the front, pull the shoulder strap out through shoulder
slot.
D.
Insert shoulder strap through restraint slot which will position
shoulder strap level with or above the child’s shoulder, shown
above. Ensure that the Shoulder strap passes through matching
slots in cover and restraint body.
E.
Ensure there are no twists in the harness strap and the buckle
tongues face the correct way.
F.
Connect shoulder strap to metal strap connector at rear of
restraint.
G.
Repeat for other shoulder strap. It is better to change one
strap at a time so that the other strap will be a guide for re-
assembly.
15
SETTING UP THE HARNESS
A.
Sit the restraint against a wall for stability and get the child to sit comfortably in position.
B.
Determine the desired shoulder strap position as detailed on the previous page.
C.
Remove the child and adjust the shoulder straps as detailed below.
D. Repeat steps A & B to confirm the correct set-up of the built-in harness.
INSTALLING INTO VEHICLE (FORWARD-FACING) (UPRIGHT OR RECLINED)
A.
Determine whether an upright or reclined
installation is required.
B.
To move the Recline Foot from upright to reclined
mode or vice versa. Pull the Foot outwards to
unlock it, then rotate the foot.
Push inwards to lock in place. See diagrams below.
Pull out
Rotate
Push in
to lock
HOW TO USE
UPRIGHT
RECLINED
Engage
into Seat
belt buckle
Far seat belt slot
Near seat belt slot
Seat belt feeds
through slot in
seat between
trim and seat
back.
FORWARD-FACING SEATBELT PATH
(marked in yellow)
C.
Position restraint centrally to the
chosen position in forward facing
mode and align restraint centrally to the
chosen seating position. Some vehicle
seat fabrics (particularly velours) may
be damaged by a child restraint used
continuously. We recommend the use of
a thick towel or other protection under
and behind the seat to keep the vehicle
seat in good condition.
D.
Fully lengthen lap or lap sash seat
belt and insert through near seatbelt slot.
Ensure the seatbelt is between the cover
and seat back as you push the seatbelt
through and out the far seatbelt slot.
Follow the yellow FORWARD-FACING
SEATBELT PATH labels.
Strap
Connector
B
C D
D
C
TODDLER USE
TODDLER USE
