9
8
D.
Engage the seat belt tongue to the buckle and adjust
the seat belt to sit firmly but comfortably around the
child's pelvis. The seat belt buckle should be located as
low as possible below the child's hip.
E.
With the lap belt (or converted lap/sash) adjusted to
be a firm fit on the child's thighs, then adjust the Child
Harness to remove all slack in the shoulder straps.
Once adjusted, further adjustments are necessary only
to the upper extension straps and to accommodate the
growth of the child.
F.
Finally, roll up the free end of the harness's adjuster
strap, then place it on the top of the adjuster, secure
using the storage strap and close the cover pad.
G.
To lengthen the harness at any time, fully pressing
the Adjuster Button (1) whilst pulling the shoulder strap
(2) upwards.
Fold the adjuster strap and secure
with Storage strap.
Harness strap loops
METHOD 2: USING LAP SEAT BELT WITH CHILD
HARNESS.
Adjust the headrest to align with the top shoulder slots of the
restraint. Fit the Child Harness as shown above. Then connect the
cross strap as shown below. Thread the lap seat belt through the
harness strap loops as shown right.
NOTE:
Seat belt extenders should not be used if the seat belt is not
long enough to fit around the child. If a seat belt extender is used
then the seat belt buckle must not be in contact with the child.
Connect the Child Harness to the
VERSA
TETHER™ Catch as
detailed on page 32.
A.
With the child seated, place each of the harness straps over each
shoulder.
B.
Feed the Right hand strap (loop end) into the cross strap loop to
connect the two sides.
C.
Feed the adult belt (lap belt or converted lap/sash)
through the harness loops, ensuring that the cross
strap loop does not disconnect. Also ensure there are
no twists in the harness, cross strap and seat belt
Pull adjuster
strap to
remove
slack
40
41
1.
Left Hand Harness Strap
2.
Right Hand Harness Strap
3.
Storage strap
4.
Cover Pad
5.
Right Hand Harness Strap Loop
6.
Cross Strap Loop
7.
Cross Strap
8.
Booster Seat Upper Anchorage Strap
9.
Car’s Anchor Fitting
Adjuster Cover
Storage Strap
HOW TO INSTALL WITH A CHILD HARNESS
HOW TO INSTALL WITH A CHILD HARNESS
2
1
Pull to
remove
slack
4
2
1
3
5
6
7
F
G
BOOSTER SEAT WITH CHILD HARNESS
BOOSTER SEAT WITH CHILD HARNESS