42
43
The Child Harness should always be used in
either of the top two rows of harness slots.
NOTE:
The Child Harness must be
in the slots which are level with or
above the child’s shoulders.
HOW TO INSTALL WITH A CHILD HARNESS
HOW TO INSTALL WITH A CHILD HARNESS
TO REMOVE CHILD
Disengage seat belt tongue and buckle, and remove belt
from child.
NOTE:
It maybe easier to unthread the car seat belt out
of the loops before lifting the Child Harness over the
child’s head.
When Booster is not being used, secure in position, by
engaging seat belt over the Booster Seat.
NOTE:
When Child Harness is no longer being used,
disconnect the gated slide so that the seat belt can be
correctly used as a lap-sash seat belt for other users.
NOTE:
The shoulder straps must be in the slots which are nearest to the child’s shoulders but not lower
than the child’s shoulders. This is achieved with the headrest above the child’s shoulders.
A.
Disengage seat belt tongue from buckle and pull seat
belt out of harness strap loops.
B.
Disconnect the Harness attachment clip from the
VERSA
TETHER™ Catch and feed the left hand Harness
Strap out the shoulder slot. Pull the right hand harness
Strap to remove the harness off the seat. (Store the
EzyGo Harness™ in a safe place for later use).
C.
Remove the built-in harness from the storage recess
under the cover. Feed crotch strap and shoulder straps
through seat cover.
D.
Feed shoulder straps through appropriate shoulder
slots in the seat back and attach to metal Strap Connector
as shown right.
RESTORING THE RESTRAINT FOR TODDLER USE
Strap
Connector
Lift Child Harness strap
over child’s head.
BOOSTER SEAT WITH CHILD HARNESS
BOOSTER SEAT WITH CHILD HARNESS
