18
19
HOW TO SET-UP
HOW TO SET-UP
PLACING TODDLER IN THE RESTRAINT
A.
Lengthen harness by lifting the adjuster lever
while pulling on both shoulder straps until the
harness will be longer than that required by the child.
B.
Place child in the restraint and feed each arm
through shoulder straps. Pull harness buckle up
between child’s legs.
C.
Fit either harness buckle tongues
into the harness buckle followed by the
other tongue until a click is heard.
Should the second tongue not
insert then press the red button and
reinsert the tongues. Ensure secure
engagement by pulling harness straps.
D.
Ensure all slack is removed from the harness lap strap by
pulling shoulder straps
E.
Pull the harness adjuster strap to remove slack so the
harness fits the child with minimal slack (see previous page).
Shoulder straps must fit firmly to the child. A loose harness
could result in serious injury in a crash. Do not over tighten.
Do not use restraint if straps do not tighten and contact your
local authorised service agent for repair.
TO REMOVE TODDLER
Press red button on harness buckle then both harness tongues will be released. Lift the shoulder straps
from the child’s shoulders and lift the child out of the seat. You may lengthen the shoulder straps if you
wish but don't forget to retighten when you next use the restraint.
Pull Harness
strap to tighten
Pull to remove slack from
harness lap strap
Shoulder
Strap
Harness
Lap strap
Crotch
Straps
Click
C
E
D
B
Lift and hold
Harness
adjuster lever.
A LOOSE HARNESS IS DANGEROUS
TODDLER USE
TODDLER USE
A
Pull to
lengthen
A
