Azkoyen t3 hopper Скачать руководство пользователя страница 43

Страница: 43 / 48

07 - 2009

7 TOOLS

The T3 hopper has a micro-controller with flash memory that allows software updating of the

hopper using Azkoyen tools.

7.1 PROGRAMMING TOOLS.

7.1.1 HEUS user application

The HEUS application is used to manage programming files, carry out software update

operations, load data bases in validators, configure validators and coin changers, etc.

Figure 22: Main screen of the HEUS application

To find files for the programming tool, enter the technical web of Azkoyen (sat.azkoyen.com)

and search by product and family groups.

Once you have saved these files in the directory \HEUS\DATAFILES

you may transfer these

to the T3 hopper directly, using the connection cable and interface or using the TL20.

There is a specific manual for the TL20 and the HEUS, available in the Azkoyen web, you

should consult it for the instructions of these devices.

7.1.2 TL20 Tool

For operations in the field, the TL20 tool serves as an intermediary device for the storage of

files. The TL20 works in combination with the user application HEUS from which the

Содержание t3 hopper

















































Результаты поиска

Содержание t3 hopper

Отзывы:

Похожие инструкции для t3 hopper

Бренды по названию

Популярные бренды

Azkoyen t3 hopper, Руководство пользователя

Результаты поиска

Содержание t3 hopper

Отзывы:

Похожие инструкции для t3 hopper

Бренды по названию

Популярные бренды