23
07 - 2009
3.4.2 Control board. T3 parallel.
1 –
Connection PCB sensorisation
2 –
Connection motor
3 –
Connection motor encoder
4 –
Connection parallel
5 –
Connection level detectors
6 –
Connection
programming and tools
7 –
Dipswitches mode selection
8 –
Status
LEDs
Figure 14: PCB T3 hopper parallel
(See description of positions 1, 5 and 6 in the section
3.3.1 Control board T3 Cctalk
)
Parallel connection
The connection between the main external connector of the T3 hopper and the circuit board.
Mode selection dipswitches
For the definition of the working mode, as well as being able to make a hardware configuration
using the entry lines IN1-IN3, you are able to establish the selection of the position of the
switches using the following table.
Table 14: Configuration of parallel working mode
1
2
3
4
5
6
7
8
