41
07 - 2009
10
11
5
With a flat head screwdriver pull apart the coin detection assembly to access the
screw below, as shown in the figure.
6
Unscrew the screws marked with the arrow, and turn over the unit to access the
electronic board.
7
Unscrew the screw wich fixes the electronic board to the plastic assembly.
8
Release the clips located on the sides.
9
Pull apart the assembly as shown in the figure.
10
Flip upside down to pull appart the track gears and track.
11
Parts to be replaced when a change in the coin configuration is needed.
12
Substitute the track, the coin concentrator and the coin agitator for the new
configuration and assemble in the reverse order.
