5 Assembly in-roof system
In-roof System
Page 38 / 64
EN141217 Axitec GmbH, Otto-Lilienthal-Str. 5, 71034 Böblingen, Germany, +49 (0)7031 62 88-5186
5.4
In-roof assembly
Bearing capacity of the roof structure tested?
Roof substructure created with connection to the bricks?
Lower cover web with the quality seal of DINplus or equivalent
available?
Entire photovoltaic system calibrated on the roof?
Corner points marked?
Has the grid plan been sketched and has the wiring of each
photovoltaic module been drawn?
Safety rules observed?
Roof plan available with number and positioning of the mounting
brackets?
Has the continuous connection cable been placed and the
photovoltaic modules with module cable and connection cable
prepared?
5.4.1
Photovoltaic modules assembled
ATTENTION
Threat of the statics requests!
Use certified mounting boards with 30 x 100 mm cross section for the
substructure. Only with these mounting boards the statics of the screws
is guaranteed.
The photovoltaic modules can either be mounted directly to the eaves or
over the tiles.