Axis P1445-LE-3 Скачать руководство пользователя страница 57

Страница: 57 / 65

AXIS P1445-LE-3 License Plate Verifier Kit

The device interface

Firmware upgrade

: Upgrade to a new firmware version. New firmware releases can contain improved functionality, bug

fixes, and completely new features. We recommend you to always use the latest release. To download the latest release, go
to

axis.com/support

When you upgrade, you can choose between three options:

•

Standard upgrade

: Upgrade to the new firmware version.

•

Factory default

: Upgrade and return all settings to the factory default values. When you choose this option, you can’t

revert to the previous firmware version after the upgrade.

•

Autorollback

: Upgrade and confirm the upgrade within the set time. If you don’t confirm, the device reverts to the

previous firmware version.

Firmware rollback

: Revert to the previously installed firmware version.

Calibrate

: Click to reset the optics to the factory default position. You need to do this if the optics have lost calibration during

transport, or if the device has been exposed to extreme vibrations. When you reset the optics, the focus and zoom settings
are also reset to default positions.

Содержание P1445-LE-3


































































Результаты поиска

Содержание P1445-LE-3

Отзывы:

Похожие инструкции для P1445-LE-3

Бренды по названию

Популярные бренды

Axis P1445-LE-3, Руководство пользователя

Результаты поиска

Содержание P1445-LE-3

Отзывы:

Похожие инструкции для P1445-LE-3

Бренды по названию

Популярные бренды