Axis P1445-LE-3 Скачать руководство пользователя страница 13

Страница: 13 / 65

AXIS P1445-LE-3 License Plate Verifier Kit

Manage lists

Add detected license plate to list

A license plate can be added directly to a list after being detected by the application.

1. Click the

Event log

tab.

2. Go to

Latest Event

3. Click

Add to list

next to the license plate that you’d like to add.

4. Select the list you would like to add the license plate in the list drop down menu.

5. Click

Append

Add descriptions to license plates

To add a description to a license plate in the list:

•

Go to

List management

•

Select the license plate you want to edit and click the pen icon.

•

Type the relevant information in the

Description

field at the top of the list

•

Click the disk icon to save.

Customize list names

You can change the name of any of the lists to fit your specific use case.

1. Go to

List management

2. Go to the list menu of the list you want to change.

3. Select

Rename

4. Type the name of the list.

The new list name will be updated in any existing configurations.

Import allowlisted license plate numbers

You can import allowlisted license plate numbers from a .csv file on the computer. In addition to the license plate number, you can
also add comments for each license plate number in the .csv file.

The structure of the .csv file must look like this:

license plate number, comment

Example

AXIS123, Reception1

AXIS345, Reception2

AXIS456, Reception3

1. Go to

List management

2. Go to the context menu next to

Allowlist

and select

Import from file

Содержание P1445-LE-3


































































Результаты поиска

Содержание P1445-LE-3

Отзывы:

Похожие инструкции для P1445-LE-3

Бренды по названию

Популярные бренды

Axis P1445-LE-3, Руководство пользователя

Результаты поиска

Содержание P1445-LE-3

Отзывы:

Похожие инструкции для P1445-LE-3

Бренды по названию

Популярные бренды