Axis P1445-LE-3 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 65

background image

AXIS P1445-LE-3 License Plate Verifier Kit

The device interface

Syslog is a standard for message logging. It allows separation of the software that generates messages, the system that stores
them, and the software that reports and analyzes them. Each message is labeled with a facility code, which indicates the software
type generating the message, and assigned a severity level.

Server

: Click to add a new server.

Host

: Enter the hostname or IP address of the server.

Format

: Select which syslog message format to use.

• RFC 3164
• RFC 5424

Protocol

: Select the protocol and port to use:

• UDP (Default port is 514)
• TCP (Default port is 601)
• TLS (Default port is 6514)

Severity

: Select which messages to send when triggered.

CA certificate set

: See the current settings or add a certificate.

Plain config

Plain config is for advanced users with experience of Axis device configuration. Most parameters can be set and edited from
this page.

SSH server

Secure Shell (SSH)

: Turn on to allow a user to securely log on and perform shell and network services over the network.

Maintenance

Restart

: Restart the device. This does not affect any of the current settings. Running applications restart automatically.

Restore

: Return

most

settings to the factory default values. Afterwards you must reconfigure the device and apps, reinstall any

apps that didn’t come preinstalled, and recreate any events and PTZ presets.

Important

The only settings saved after restore are:

• Boot protocol (DHCP or static)

• Static IP address

• Default router

• Subnet mask

• 802.1X settings

• O3C settings

Factory default

: Return

all

settings to the factory default values. Afterwards you must reset the IP address to make the device

accessible.

Note

All Axis device firmware is digitally signed to ensure that you only install verified firmware on your device. This further
increases the overall minimum cybersecurity level of Axis devices. For more information, see the white paper “Signed
firmware, secure boot, and security of private keys” at

56

«
...
54
55
56
57
58
...
»

Содержание P1445-LE-3


































































Отзывы:

Нет отзывов

Похожие инструкции для P1445-LE-3

Бренд: CAME Страницы: 32

Бренд: Aalborg Страницы: 15

Бренд: Aalborg Страницы: 48

Бренд: Kasco Страницы: 3

Бренд: Campbell Страницы: 3

Бренд: Daikin Страницы: 48

Бренд: Daikin Страницы: 77

Бренд: Daikin Страницы: 32

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 14

Бренд: Daikin Страницы: 16

Бренд: Daikin Страницы: 1

Бренд: Samson Страницы: 52

Бренд: H3C Страницы: 5

Бренд: H3C Страницы: 4

Бренд: Hanna Instruments Страницы: 54

Бренд: Hanna Instruments Страницы: 2

Бренд: M-system Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды