Axis P1445-LE-3 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 65

background image

AXIS P1445-LE-3 License Plate Verifier Kit

Troubleshooting

Reset to factory default settings

Important

Reset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, to
the factory default values.

Note

The camera has been preconfigured with AXIS License Plate Verifier. If you reset to factory default, you need to reinstall the
license key. See

Install the application on page 9

.

To reset the product to the factory default settings:

1. Disconnect power from the product.

2. Press and hold the control button while reconnecting power. See .

3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.

4. Release the control button. The process is complete when the status LED indicator turns green. The product has been reset

to the factory default settings. If no DHCP server is available on the network, the default IP address is

192.168.0.90

.

5. Use the installation and management software tools to assign an IP address, set the password, and access the device.

The installation and management software tools are available from the support pages on

axis.com/support

.

You can also reset parameters to factory default through the device’s webpage. Go to

Maintenance

>

Factory default

and click

Default

.

Upgrade the firmware

Important

Preconfigured and customized settings are saved when you upgrade the firmware (provided that the features are available in
the new firmware) although this is not guaranteed by Axis Communications AB.

Important

Make sure the device remains connected to the power source throughout the upgrade process.

Note

When you upgrade the device with the latest firmware in the active track, the product receives the latest functionality
available. Always read the upgrade instructions and release notes available with each new release before you upgrade the
firmware. To find the latest firmware and the release notes, go to

axis.com/support/firmware

1. Download the firmware file to your computer, available free of charge at

axis.com/support/firmware

2. Log in to the device as an administrator.

3. Go to

Maintenance > Firmware upgrade

and click

Upgrade

.

When the upgrade has finished, the product restarts automatically.

You can use AXIS Device Manager to upgrade multiple devices at the same time. Find out more at

axis.com/products/axis-device-manager

.

Performance considerations

When setting up your system, it is important to consider how various settings and situations affect the performance. Some factors
affect the amount of bandwidth (the bitrate) required, others can affect the frame rate, and some affect both. If the load on the
CPU reaches its maximum, this also affects the frame rate.

63

«
...
61
62
63
64
65
»

Содержание P1445-LE-3


































































Отзывы:

Нет отзывов

Похожие инструкции для P1445-LE-3

Бренд: VAT Страницы: 29

Бренд: Balboa Instruments Страницы: 19

Бренд: dbx Страницы: 52

Бренд: Hankscraft Runxin Страницы: 58

Бренд: Watlow Страницы: 59

Tekmar WiFi Snow Melting Control 670

Бренд: Watts Страницы: 48

Бренд: Keba Страницы: 16

Бренд: KEB Страницы: 16

CEmarking RCX221

Бренд: Yamaha Страницы: 468

Бренд: Yamaha Страницы: 5

Бренд: Yamaha Страницы: 14

Бренд: Yamaha Страницы: 28

Бренд: Yamaha Страницы: 109

Бренд: Yamaha Страницы: 20

Бренд: Yamaha Страницы: 2

Бренд: Vaillant Страницы: 12

GRASS VALLEY MDX-3901

Бренд: Belden Страницы: 45

FX-COMM4NDER MFX3203

Бренд: Magicfx Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды