Axis P1445-LE-3 Скачать руководство пользователя страница 34

Страница: 34 / 65

AXIS P1445-LE-3 License Plate Verifier Kit

The device interface

Important

We recommend you not to use multiple image correction features at the same time, since it can lead to performance issues.

Barrel distortion correction (BDC)

: Turn on to get a straighter image if it suffers from barrel distortion. Barrel distortion

is a lens effect that makes the image appear curved and bent outwards. The condition is seen more clearly when the image is
zoomed out.

Crop

: Use the slider to adjust the correction level. A lower level means that the image width is kept at the expense of

image height and resolution. A higher level means that image height and resolution are kept at the expense of image width.

Remove distortion

: Use the slider to adjust the correction level. Pucker means that the image width is kept at the expense

of image height and resolution. Bloat means that image height and resolution are kept at the expense of image width.

Electronic image stabilization (EIS)

: Turn on to get a smoother and steadier image with less blur. We recommend you

to use EIS in environments where the device is mounted in an exposed location and subject to vibrations due to, for example,
wind or passing traffic.

Focal length

: Use the slider to adjust the focal length. A higher value leads to higher magnification and a narrower angle

of view, while a lower value leads to a lower magnification and a wider angle of view.

Stabilizer margin

: Use the slider to adjust the size of the stabilizer margin, which determines the level of vibration to

stabilize. If the product is mounted in an environment with a lot of vibration, move the slider towards

Max

. As a result, a smaller

scene is captured. If the environment has less vibration, move the slider towards

Min

Straighten image

: Turn on and use the slider to straighten the image horizontally by rotating and cropping it digitally. The

functionality is useful when it’s not possible to mount the camera exactly level. Ideally, straighten the image during installation.

: Click to show a supporting grid in the image.

: Click to hide the grid.

The image before and after it has been straightened.

Содержание P1445-LE-3


































































Результаты поиска

Содержание P1445-LE-3

Отзывы:

Похожие инструкции для P1445-LE-3

Бренды по названию

Популярные бренды

Axis P1445-LE-3, Руководство пользователя

Результаты поиска

Содержание P1445-LE-3

Отзывы:

Похожие инструкции для P1445-LE-3

Бренды по названию

Популярные бренды