Axis P1445-LE-3 Скачать руководство пользователя страница 37

Страница: 37 / 65

AXIS P1445-LE-3 License Plate Verifier Kit

The device interface

View areas

: Click to create a view area.

Click the view area to access settings.

Name

: Enter a name for the view area. The maximum length is 64 characters.

Aspect ratio

: Select desired aspect ratio. The resolution adjusts automatically.

PTZ

: Turn on to use pan, tilt, and zoom functionality in the view area.

Privacy masks

: Click to create a new privacy mask. The maximum number of masks depend on the complexity of all masks combined.

Each mask can have maximum 10 anchor points.

Privacy masks

: Click to change the color of all privacy masks, or to delete all privacy masks permanently.

Mask x

: Click to rename, disable, or permanently delete the mask.

Audio

Device settings

Input

: Shows the type of input.

Allow stream extraction

: Turn on to allow stream extraction.

Input type

: Select the type of input, for instance if it’s a microphone or line-in.

Power type

: Select power type for your input.

Activate changes

: Click to activate your selection.

Separate gain controls

: Turn on to adjust the gain separately for the different input types.

Automatic gain control

: Turn on to dynamically adapt the gain to changes in the sound.

Gain

: Use the slider to change the gain. Click the microphone icon to mute or unmute.

Output

: Shows the type of output.

Gain

: Use the slider to change the gain. Click the speaker icon to mute or unmute.

Stream

Encoding

: Select the encoding to use for the input source streaming. You can only choose encoding if audio input is turned on. If

audio input is tuned off, click

Enable audio input

to turn it on.

Содержание P1445-LE-3


































































Результаты поиска

Содержание P1445-LE-3

Отзывы:

Похожие инструкции для P1445-LE-3

Бренды по названию

Популярные бренды

Axis P1445-LE-3, Руководство пользователя

Результаты поиска

Содержание P1445-LE-3

Отзывы:

Похожие инструкции для P1445-LE-3

Бренды по названию

Популярные бренды