AXIS 7100
User’s Manual
Using the AXIS 7100
91
Sending to Destinations
Note:
Follow these instructions on the AXIS 7100 control panel:
1.
The AXIS 7100 display shows “
Send to:
xxxxxx” when it is
ready for use. For example:
2.
Use
scrolling keys to find the required destination
from the list. Press and hold the key to autorepeat scrolling.
If you want to add a temporary E-mail destination, refer to
“
Adding Temporary Destinations
”on page 94.
Note:
3.
If you want to send the image to more than one destination,
press Select
to choose each destination:
Note:
4.
Repeat steps 2 and 3, until all desired destinations are selected.
Before sending to an e-mail address or a file, the Administrator must
have set up the destinations as described in “
Specifying Destinations
” on
page 59.
Send to:
Accounting Dept
If a keyboard is connected you can easily search the list by pressing the
first letter(s) of the required destination.
Send to:
+1
Accounting Dept
When sending to a printer, the image can not simultaneously be sent to
another destination type and can only be sent to one printer at a time
.