Axis 7100 Скачать руководство пользователя страница 19

Страница: 19 / 181

AXIS 7100

User’s Manual

Basic Installation

AXIS Product CD

The AXIS Product CD provides an easy-to-use electronic

catalog, that includes all AXIS product software, utilities

software, white papers, user documents, technical notes and
references etc. It can be used within all of the supported Axis

computing environments. AXIS 7100 does not require any

additional software installation from the AXIS Product CD.

You can view the contents of the AXIS Product CD via the

Adobe Reader interface or HTML interface. All documents
presented on the CD are in PDF format.

Notes:

• You can download the Acrobat Reader from the AXIS Product CD or

from the Adobe Web site at www.adobe.com

• All of the software and information provided on the AXIS Product CD

is also available from the Axis Website at http://www.axis.com.

Содержание 7100






















































































































































































Результаты поиска

Содержание 7100

Отзывы:

Axis 7100, Руководство пользователя, Страница: 19 / 181

Результаты поиска

Содержание 7100

Отзывы: