Axis 7100 Скачать руководство пользователя страница 53

Страница: 53 / 181

AXIS 7100

User’s Manual

Configuring the AXIS 7100

correctly.

Name Field -

Specify the name of the field that contains the

destination name.

E-mail Field -

Specify the name of the field that contains the e-

mail address.

Search Base -

Specify where to begin the search, e.g.

o=companyname

c=countrycode

. There may be other required

settings depending on the LDAP server. Refer to the user
documentation of the LDAP server for more information.

Filter -

Specify an LDAP filter in order to reduce the length of the

destination list. The filter can be a real LDAP filter, e.g.
(givenName=*). You can also specify a list of conditions, e.g.

mail=adm*,telephone1 800*

. In this case, the AXIS

7100 will generate a real LDAP filter.

•

External Address Book from a File

(e-mail, printer and file

destinations) - Select this option to read an external address
book from a file on an FTP server.

FTP Server -

Specify the name or IP Address of the FTP server.

User -

Specify the user name for logging on to the FTP server. If

left blank, the User and Password specified on the

Destination

Default

page will be used.

Password -

Specify the password for logging on to the FTP

server. If the User field is left blank, this setting will be ignored.

Confirm -

Confirm the password to make sure it was spelled

correctly.

Directory -

Specify the directory on the FTP server where the file

is stored. Example:

/pub/axis7100/address

If left blank, the root directory on the FTP server will be used.

File Name -

Specify the name of the file.

The file containing the destination information must be a
text file using the following syntax:

Содержание 7100






















































































































































































Результаты поиска

Содержание 7100

Отзывы:

Axis 7100, Руководство пользователя, Страница: 53 / 181

Результаты поиска

Содержание 7100

Отзывы: